回旋行波管的全固态Marx高压脉冲调制器设计

为回旋行波管设计了全固态近方波Marx高压脉冲调制器,设计参数:输出电压70kV,输出电流15A,工作频率0~2kHz可调,脉宽200μs可调,功率容量可以达到百kW级。设计利用串联IGBT作为控制开关,利用FPGA通过光纤传输的方式对IGBT进行逻辑控制、电路保护和监测,补偿单元利用FPGA控制IGBT自动补偿的方式对顶部压降进行补偿,使得输出电压平顶度达到±1%。对电路各个部分进行仿真及测试。结果验证此设计方案的可行性,可以提高回旋管电源的稳定性和工作频率,减小调制器体积及维护成本,并为高压测试提供了实验基础。     

飞秒脉冲激光啁啾对4,4’-二(二正丁胺基)二苯乙烯的光限幅及动态双光子吸收的影响(英文)

通过采用预估矫正的时域有限差分方法(FDTD)数值求解Maxwell-Bloch方程,研究飞秒啁啾脉冲激光在4,4’-二(二正丁胺基)二苯乙烯(BDBAS)分子介质中的光限幅行为(OL)和动态双光子吸收(TPA)截面.计算表明啁啾率的符号和大小都对频谱演化和光限幅行为产生影响.啁啾率的符号决定频移的方向:正啁啾对应频谱蓝移,负啁啾对应频谱红移.随着啁啾率绝对值的增大,频移更加明显,光限幅窗口变窄,同时出射光强饱和值变大.有趣的是,当负啁啾降低到一定值(-0.025/fs2)时,出现自感应透明(SIT)现象.另外,动态双光子吸收截面在考虑啁啾效应的情况下减小.本研究提供了一种控制非线性光学吸收的方法.     

On the Nano/Micro-Mechanics of Metallic Glass

Metallic glass (MG) is amorphous and has some outstanding properties such as ultrahigh strength, superior elasticity, and excellent thermo-plasticity. However, as MG is relatively new to the metal family, the relationship between its physical properties and amorphous structure is still unclear. This article aims to provide an insightful discussion through a comprehensive review about the investigations in the past few decades on the scientific mechanisms of this class of material. The discussion of the paper will include the following key aspects: (1) the formation mechanism of an amorphous structure through glass transition, (2) the structural characterization and models, (3) the micromechanics of plastic event and shear band, and (4) the correlation between the amorphous structure and its mechanical properties.     

Hidden chemistry of substituted aniline radical cations in water: a mechanistic study

Absolute rate constants for hydroxyl radical, azide radical, and hydrated electron reactions with a sulfa drug 4,4'‐diamino diphenyl sulfone (dapsone) in water have been evaluated using electron pulse radiolysis technique. Absolute rate constants for hydroxyl radical and azide radical were determined as (8.4 ± 0.3) × 10⁹ and (5.6 ± 0.5) × 10⁹ M^?1 s^?1, respectively. The reduction of dapsone with the hydrated electron occurred with rate constant of (9.2 ± 0.1) × 10⁹ M^?1 s^?1. Hydroxyl radical reactions result in the synchronous formation of adduct as well as anilino radical. The interesting observation is that the yield of the anilino radical increases with increase in pH. Contrary to this, the yield of the adduct decreases with pH. We propose that hydroxyl radical adds predominantly to the aniline. In contrast, the reaction of azide radical with the dapsone suggests that the reaction occurs at the –NH₂ moiety of the aniline ring. The free radical electron transfer from dapsone to parent radical cation of non‐polar solvent also results in the formation of anilino radical only suggesting that the radical cation of dapsone has a short lifetime. The reaction of hydrated electrons with the dapsone suggests that the reaction occurs at different reaction site. The experimental results supported by theoretical calculations of this study provide fundamental mechanistic parameters that probably decide the fate of the radical cation of aniline derivatives. Copyright © 2014 John Wiley & Sons, Ltd.     

利用双色啁啾激光场产生超短的单个阿秒脉冲

数值研究了氦原子在两束啁啾激光场形成的组合场驱动下所发射高次谐波的特点.计算结果表明,当两束啁啾激光场的形式为δi(t)=-βiωit2/T (i=1,2)并且啁啾参数分别为β1=0.3和β2=0.6时,高次谐波谱的平台区域能得到很大的扩展,随后通过激光场强度以及相位的优化,谐波截至能量延伸到了812eV.最后通过叠加谐波次数从160次到210次,210次到260次,260次到310次,可获得一系列脉宽为33as的单个阿秒脉冲.     

各向同性光纤中拉曼增益对光脉冲自陡峭的影响

运用数学解析法导出了关于拉曼增益与自陡峭综合效应的光脉冲传输方程,在此基础上引入洛伦兹模型将拉曼增益整合到非线性系数中来研究光脉冲中拉曼增益对自陡峭效应的作用,重点分析了高斯脉冲在各向同性光纤中传播时,拉曼增益对其自陡峭效应具体影响方式,结果表明拉曼增益会减弱自陡峭中后沿偏移程度,减小脉冲展宽,但不会影响其峰值大小.     

LABVIEW下冲击试验测试信号分析模块的设计

根据GJB冲击环境试验测试要求,介绍LABVIEW平台下两类典型冲击信号分析模块的设计方法,主要讲述利用多图层叠加编程技术实现GJB150.18-1986标准规定的半正弦波与后峰锯齿波动态套容差曲线分析模块的设计以及利用递归算法实现冲击响应谱分析模块的设计。其次,采用资源DLL封装技术对LABVIEW编程实现的冲击信号分析模块进行封装,在其他编程语言中调用DLL实现冲击信号分析模块在其他编程语言中的功能链接。实践表明,LABVIEW图形化编程技术可快速实现两类冲击信号分析模块的设计,将高速数据采集模块与冲击信号分析模块集成,可有效完成冲击试验测试与信号分析处理任务。     

脉冲单频Nd:YVO4激光器及其倍频输出特性研究

为了研制激光干涉成像所需的主振荡功率放大(MOPA)结构脉冲单频激光器,本文完成MOPA激光器的种子源即声光调Q脉冲单频1 064 nm激光器的特性研究,同时完成种子源腔外倍频绿光特性研究。脉冲单频激光器采用声光调Q模块实现脉宽约20 ns的1 064 nm脉冲激光输出,采用环形腔设计并采用一组不同厚度的标准具实现单纵模运转。实验研究基频1 064nm和倍频532 nm激光脉冲的线宽,得出在全脉宽范围内都具有较高时间相干性的结论。实验分别获得脉宽约28 ns峰值功率约6.5 kW的1 064 nm脉冲单频激光和脉宽约20 ns、峰值功率约0.5 kW的532 nm脉冲单频激光,腔外倍频效率为5.6%。实验同时也验证了腔外倍频的激光脉宽压缩效应。     

裂纹端部细短纤维的应力分析

基于裂纹端部存在与其裂纹面相垂直的二相细短纤维分析模型，采用叠加原理推导了求解纤维表面应力分布函数的积分方程，通过简化得到了该方程的解析表达显式，该积分方程的特征值方程是纤维几何参数，材料常数以及纤维相对于裂纹位置的相关函数，当材料参数不满足特征方程时，积分方程将具有唯一解；并借助数值方法，给出了纤维剪应力分布算例，和纤维对应力强度因子的影响。     

压-剪复合应力波作用下材料动态断裂韧性研究

提出亚微秒单脉冲应力波载荷作用下Ⅱ型裂纹的平板冲击实验技术 .加载率为dK dt～ 10 8MPa·m1 2 ·s-1.实验中由锰铜应力片和弹性波理论分别测定和计算了压应力 ;通过微观分析确定了动态裂纹的平均扩展长度 ;引进等效应力强度因子 ,用动态断裂理论确定了 6 0 #钢的动态断裂韧性KⅠd和KⅡd ;建立了亚微秒冲击载荷作用下确定材料动态断裂韧性的方法